Lower Left section of the deck.  This includes the ball loading solenoid, associated flipper and runway.  This assembles witht he middle and right sections.

Print this lot in PLA

Wall thickness 2.4mm or so.  For the general parts a 10% fill is OK, but for the reloader parts we would use more density say 30% fill.

Choose a colour that you think will be nice, and maybe a contrasting colour for the reloader if it is visible

The files are:
- Lower Decl Latout_L - is the main left deck section
- Lower Deck outer runway, is the L shaped runway at the bottom of the deck.  LEave a 32mm gap to the Lower Deck_L piece.
- Reload files all form the reloader, print these solid or minimum 40% fill.
